Views: 5 Author: Site Editor Publish Time: 2022-06-12 Origin: Site
In order to distribute water evenly in the water treatment equipment, a suitable water distributor will be installed in the FRP tank water treatment tank to play the role of collecting and distributing water. Generally, there are upper water distributors and lower water distributors.
Note: Considering the height of the tank, in order to facilitate installation, the tank can be placed horizontally to the ground first.
1.Prepare the parts.
2.Put the adapter, the mushroom head and the loose parts of the branch pipe of the water distributor into the tank through the opening, and tighten the branch pipe of the water distributor in the tank.
3.Tighten the adapter and mushroom head.
4.Match the external pipe fittings to the threads of the tank mouth
5.The installation is complete.
According to the above installation steps, the water distributor is installed. The upper and lower water distributors of the tank are installed in the same way. In actual operation, pay attention to the need to install the water distributor first and then install the packing.