Misconception 1: membrane water treatment equipment is a difficult operating system In fact, the membrane water treatment system operation is highly automated, start-stop, dosing and online flushing operations are controlled by the PLC system, completely unattended, only need to manually inspe
Ultrapure water. Ultrapure water: Ultrapure water (ultra-pure water), both the conductive medium in the water almost completely removed, and the non-dissociated colloidal substances, gases and organic matter in the water are removed to a very low degree of water. The resistivity is greater than
The production water flux and salt rejection rate are the key parameters of reverse osmosis and nanofiltration membranes. In addition to the characteristics of the membrane itself, the water flux and removal rate of the membrane system are mainly affected by pressure, temperature, recovery rate, inf
RO membrane technology common problems and solutions1.How often should the reverse osmosis system be cleaned? In general, when the standardized flux drops by 10-15%, or the system desalination rate drops by 10-15%, or the operating pressure and the pressure difference between sections increase by