Step-by-Step Guide To Operating Your RO System

Operating your RO system is straightforward once you're familiar with the interface. Here's a quick guide to help you get started safely and correctly.

Step 1: Access Settings

Start by tapping the “Settings” button.
To proceed, enter the user password. The default password is 0000.

Once inside, you’ll see the factory preset operating parameters — such as flushing time, sterilization time, and more. These settings can be adjusted by trained professionals according to your water treatment needs.
Note: If you’re not professionally trained, we recommend not altering these settings to avoid potential system issues.

Step 2: System Configuration

Next, go to the “System” tab.
Here, you can:

• Change the language

• Adjust screen brightness

• Set the screen timeout

• Update the login password

Once your configurations are complete, make sure to tap “Save”.

Step 3: Check the Main Interface

Return to the main screen, labeled “System Flow.”
On the left-hand side, you’ll see real-time operational data, including:

• Inlet and outlet water conductivity

• The working status of each system component

If everything looks good, tap “Start”, then tap “Confirm.” The system will automatically begin running.
In case of any abnormalities during operation, the system is designed to stop automatically for protection.

Step 4: Using Manual Mode

You also have the option to operate the system manually.
To enter manual mode, re-enter the password.
You’ll see two rows of switches — these control key components like the:

• Raw water valve

• Raw water pump

• And other system parts

You can turn these on or off as needed.
Please note: While in manual mode, settings cannot be accessed. You’ll need to switch back to automatic mode to make any configuration changes.

Step 5: About & Supplier Information

At the bottom of the menu, you’ll find “About” and “Supplier” sections.
These fields are preset at the factory but can be customized upon request.

That's a complete overview of the main operation steps for your RO system.
If you have questions or need further assistance, feel free to contact our sales team.

Thank you for reading!